PRODUCT DESCRIPTIONS
Packing Specifications
|
Media Type |
Sheet Spacing |
Surface Area |
sheets/ft |
Sheet Gauge |
Pack Depth |
Pack Width |
Pack Length |
|
|
|
|
|
|
|
|
|
|
CF-650 |
.25 in |
119 ft2/ft3 |
44 |
.008 in |
6 or 12 in |
12 in |
6, 8 ft. |
|
|
6.9 mm |
390m2/m3 |
|
0.2 mm |
152, 305 mm |
305 mm |
|
|
|
|
|
|
|
|
|
|
|
CF-1200 |
.5 in |
69 ft2/ft3 |
26 |
.008, .01 in |
4, 6, 12 in |
12 in |
6, 8, 10 ft |
|
|
12 mm |
226m2/m3 |
|
.2, .25 mm |
101, 152, 305 mm |
305 mm |
|
|
|
|
|
|
|
|
|
|
|
CF-1900 |
.75 in |
48 ft2/ft3 |
16 |
.01, .015 in |
6, 12, 24 in |
12 in |
6, 8, 10, 12 ft |
|
|
19 mm |
157m2/m3 |
|
.25, 38mm |
152, 305, 610 mm |
305 mm |
|
|
|
|
|
|
|
|
|
|
|
CFS-3000 |
1.2 in |
31 ft2/ft3 |
10 |
.015, .02 in |
12, 24 in |
12, 24in |
6, 8, 10, 12 ft |
|
|
30 mm |
102m2/m3 |
|
.38,.51mm |
305, 610 mm |
305 mm |
|
|
|
|
|
|
|
|
|
|
|
IFR-6000 |
2.4 in |
n/a |
20 |
std. |
24, 36 in |
12 in |
6, 8, 10, 12 ft |
|
|
60 mm |
|
|
|
610, 915 mm |
305 mm |
|
Non standard lengths packs with straight end cuts are available at no extra charge but cutoff portions must be included in the cost. Custom cutting for circles is available. All of the CF packings are cross corrugated type media.
CF-650 - This is a very dense packing used in clean water applications such as aquariums, bait holding systems or laboratory settings. It is not normally used in production aquaculture systems.
CF-1200 - This is a dense media often used in food fish production systems. Good suspended solids control is required to prevent plugging.
CF-1900 - This is an open media used where suspended solids may be a problem. This media has good resistance to plugging when used for ammonia control. The CF-1900 is sometimes used as a tube settler to remove suspended solids.
CF-3000 - This a very open media that is used in applications where severe plugging is expected. This media is commonly used in industrial and domestic sewage treatment plants with very heavy nutrient loadings. The CF-3000 is also used as a tube settler.
IF-6000 - This media is specifically designed as a tube settling media. It is not a cross corrugated media, but has tubes that run on a 30 deg. angle off the vertical. It has no micro structure, contact points or ridges that impede the ability of the collected solids to slide out of the pack.
List Prices Effective September 1, 2006
|
|
|
|
|
||
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
Fill Type |
Sheet |
Pack |
PVC |
PVC |
PVC |
|
|
Thickness |
Depth |
$/cu.ft. |
$/cu.ft. |
$/cu.ft. |
|
|
|
|
|
|
|
|
CF-650 |
8 mil |
12" |
$22.10 |
|
$23.94 |
|
|
|
|
|
|
|
|
CF-1200 |
8 mil |
12" |
$10.40 |
$10.40 |
$10.81 |
|
CF-1200 |
10 mil |
12" |
$11.47 |
$11.47 |
$11.91 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CF-1900 |
10 mil |
12" |
$6.33 |
$6.33 |
$6.89 |
|
|
|
24" |
$6.02 |
$6.02 |
$6.58 |
|
CF-1900 |
15 mil |
12" |
$8.39 |
$8.39 |
$9.19 |
|
|
|
24" |
$8.09 |
$8.09 |
$8.87 |
|
|
|
|
|
|
|
|
CFS-3000 |
15 mil |
12" |
$6.35 |
$6.35 |
$6.73 |
|
|
|
24" |
$6.03 |
$6.03 |
$6.42 |
|
|
|
|
|
|
|
|
IFR-6000 |
15 mil |
24" |
$12.37 |
|
|
Boxing for all fill is $.75/cu.ft. Boxing is required for all orders shipping via UPS or air freight.
Palletizing is $.30/cu.ft. Palletizing is required for all shipments going via common carrier in LTL (less than truckload) quantities.
Standard pack sizes are 12" wide and 6, 8 or 10 ft. in length. (CF-650 max. length is 8') Non standard lengths with straight end cuts are available at no extra charge but cutoff portions must be included in the cost. Longitudinal cuts for 4" or 6" thick packs are $.15/cu.ft. per cut. Custom cutting for circles is available. Please call for a quote.
Minimum order quantity is one piece 6 ft. long. This piece can be cut into small pieces. For example: 3 pieces, each 2 ft. long.
Order increments must be in one piece increments of standard, stock lengths. Stock lengths are 6, 8 and 10 ft.
|
Water
Distribution Nozzles |
|
|
Cost Each |
||
|
Nozzles for Pipe type spray systems |
|
|
|
||
|
CF-CES2 orifice sizes .75", .875", 1.0",
1.125", 1.25", 1.375", 1.5" |
$13.62 |
||||
|
CF-CES2 mounting adaptor, pipe sizes
4", 6", 8",
10" |
|
$2.50 |
|||
|
CF-CES1.5 orifice sizes .75", .875",
1.0", 1.125", 1.25", 1.625" |
|
$4.84 |
|||
|
CF-LHD2 orifice sizes .75", .875",
1.0", 1.0625", 1.125", 1.25", 1.5" |
$2.70 |
||||
|
|
|
|
|
|
|
|
Distribution Pan Nozzles |
|
|
|
|
|
|
XF-Crown orifice sizes .5", .625"
.75", .875", 1.0",
1.125", 1.25", 1.375" |
$3.20 |
||||
|
XF-LH11 orifice sizes 1.0",
1.125", .25" |
|
|
$2.30 |
||
|
|
|
|
|
|
|
|
Decking
Grids |
|
|
|
|
|
|
AquaGrid 1.25" x 24" x 24" Non Skid decking grid,
floating |
|
$13.28 |
|||
|
AquaGrid 1.25" x 24" x 24" Non Skid decking grid,
sinking |
|
$18.85 |
|||
All prices are in USD. Prices for all products are FOB factory. Normal terms of sale are cash in advance unless credit has been established. Prices and availability are subject to change without notice.
This price list was updated
Minimum order amount is $25.00 USD
Quantity discounts are available for orders totaling more than $500.00 USD.
We now accept MasterCard and Visa
and American Express.